Re: Locator : region problem
And what does one do then if there's a group list?Or if (say) I'm using group A,A' but then find I need data from region BA?
View ArticleRe: vAPP VCOPS 5.7 - "The alert queue is full"
Hi,this error is not about MQ, it's about an internal queue for alertingThe default queue size is 500, so one reason might be that you have more than 500 alerts in 1-2 seconds period, and the alerts...
View ArticleRe: Does virtual Windows Server 2012 cause file sharing to not function?
I setup a virtual Windows 2012 server and it works for me without issues. Can you confirm you enabled the File Server role (under File and Storage Services)? André
View ArticleRe: VM Workload and Stress high watermarks
if you have license for the custom-ui, this should be achievable with a consolidated alert
View ArticleClik here to view.
Re: Does virtual Windows Server 2012 cause file sharing to not function?
Here it is:If I didn't have this role setup correctly, file sharing on the "C" drive shouldn't work but in this case, it works except the "D" drive.
View ArticleRe: Locator : region problem
I'm not sure what you mean by group list, but if A,A' need access to BA, then they need to define at least a proxy to it. A function would also work.
View ArticleRe: Host not seeing all iSCSI targets
You need to configure port binding to use the multiple paths (or) multiple vmkernel interfaces. On the Network configuration tab > click Add and select vmk1 from iSCSI1 Port Group. Repeat the same...
View ArticleRe: How to install VMtools on Manjaro (ArchLinux)
It's one thing to dump a few/several lines of output into the body of a reply to highlight an issue however to dump thousands of lines (2064 if I counted correctly!) is considered rude and unacceptable...
View ArticleRe: vAPP VCOPS 5.7 - "The alert queue is full"
Thank you for your help gradinka, Where can I see the number of alert per second? Because right now I have only 71 active alerts. In fact, my problem occurs when I loss network connectivity with...
View ArticleRe: Cache Update and synchronized with a Database
Unfortunately there is no built-in way to do this. Please also see this reply Re: Synchronization With Database --Jens
View ArticleMixing Management and Backup traffic
I am using 5.1 and have a dvSwitch that has a vmkernel port for management traffic as well as a virtual machine port group for traffic used to backup the environment. Backups run nightly and use a lot...
View ArticleRe: vAPP VCOPS 5.7 - "The alert queue is full"
I see - so are you sure that vc_ops can actually send the alerts? e.g. it can conect to the SMTP server etc.
View ArticleUnable to make any dedicated pool available for local mode (and, yes, I've...
Subject line says it all. I absolutely cannot get any pool or desktop image to get sent to the Transfer server. First off: I've done it before, and now it's not working. Next: The Transfer server is...
View ArticleVMware Horizon View 2.1 won't connect
Since the release and updating of the iOS app on July 11, our iPads are not able to connect to the server the primary host server address. The app will connect directly to the broker. Sometimes a...
View ArticleHi, I have 10 Cores on my ESX so how many cores can i assign to a single VM...
Hi, I have 10 Cores on my ESX so how many cores can i assign to a single VM running on the host ?
View ArticleBest Design for NFS virtual networking without LACP
I'm using 1 dvswitch for NFS. I have 2 physical NICS at 1GB dedicated to it. There are less than 20 VMs and light storage traffic. I'm using Enterprise Plus licensing on 5.1. I cannot use LACP on...
View ArticleRe: How to install VMtools on Manjaro (ArchLinux)
Hi WoodyZ, I just updated Manjaro with the new 3.10 kernel (sudo mhwd-kernel -i linux310) and installed the new linux-headers310 but this doesn't fix the problem. Please find below the screen log of...
View ArticleRe: Unable to make any dedicated pool available for local mode (and, yes,...
What hardware version is the golden image on? There used to be some limitations on what could be used with local mode so maybe that is it.
View ArticleClik here to view.
Re: How to install VMtools on Manjaro (ArchLinux)
Hi WoodyZ, Just modified the message and attached the log file (sorry but I didn't know how to do it). So, thanx for the hint since I don't want to be rude with anyone.
View Article